mobile vlan on 10gb port

[hibym]

Hello,

I have a short question..

I want to apply the vlan mobile command to a 10 Gb port on a OS6850-P24X / -24X (6.4.3.520.R01).
The switch is in an stack with 5 others.

background information: I want to connect a HP Server and the vm's on this server will be in different vlan's.

If I send the command vlan port mobile 4/26, I get an error:

Port is absent or not a mobility candidate (tagged, aggregable, stacking, mirroring or vpls_access port)

There is no 802.1q tag on the port and nothing else is configured on this port.
I used both stacking ports at the rear end of the switch. Is it possible, that they are "connected" like the combo ports?

TY for any help!
Alex

[silvio]

yes at the 6850 the ports 25 and 26 are 10Gig-XFP-Ports. So normaly no Client is there connect (normal used as uplink). Thats why the port mobility is not allowed there.
br Silvio

[hibym]

Hey Silvio,
thanks for your quick reply every time. I am really thankful for that.

I know that the ports are usually used as uplink.
But I don't see any technical reason why it is not allowed.

So there is no solution / an alternative to configure dynamic vlan's on the 10G xfp ports?

Best Regards,
Alex