Hi guys,
I'm completely new to Alcatel switching.
My experience comes from HP and Cisco products.
I configuring a simple scenario with one core switch and 3 edge.
All edge switches connect to the Core using fiber uplink with an SFP.
I have 2 vlans, the default vlan and vlan10. I have ports tagged on vlan10 on all switches.
I'm trying to propagate vlan10 from core to all edge switches, so I need to tag the uplink ports.
And here's is the problem, I can't manage to find where I configure the tag on the SFP port.
Over in "interface configuration" menu, the fiber uplinks appear as Hybrid Interfaces 1 2 3 4.
In 802.1Q (port tagging) how can I select these ports?
Because I guess if I tag Slot 1 Port 1 I will be tagging the copper interface and not the fiber, right?