I am having trouble with getting the PC port on the phone to work.
- When I plug a PC into the PC port on the phone, the PC does not get a network connection (no IP address, cannot reach DHCP server). The phone works perfectly.
- When the PC is plugged directly into the switch, network connectivity works just fine.
This used to work when the native/untagged VLAN was 1, but we're changing that as part of a network segregation exercise.
Are there any settings that one must change on the IPTouch so that the VLAN config works? From what I know, most IP phones automatically pass untagged frames through to the native VLAN configured on the switchport.
Thank you!
