ip 4028 no tftp response

Post Reply
officiel-salah
Member
Posts: 7
Joined: 16 Sep 2016 07:04

ip 4028 no tftp response

Post by officiel-salah » 16 Sep 2016 07:15

hello , I configured post 4028 with this configuration :
ip: 192.168.1.158
msk : 255.255.255.0
route 192.168.1.1
tftp : 192.168.1.101
but always show me the error : no response tftp
here is attached the pbx configuration picture
You do not have the required permissions to view the files attached to this post.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6899
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ip 4028 no tftp response

Post by cavagnaro » 16 Sep 2016 09:54

Does your PBX has at least 1 set created?
Can you ping the phone from the OXE?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

officiel-salah
Member
Posts: 7
Joined: 16 Sep 2016 07:04

Re: ip 4028 no tftp response

Post by officiel-salah » 16 Sep 2016 10:03

i dont have a oxe ! i use a OXO can u see the picture in the post

officiel-salah
Member
Posts: 7
Joined: 16 Sep 2016 07:04

Re: ip 4028 no tftp response

Post by officiel-salah » 16 Sep 2016 11:50

i have CPU-2 , should i have to buy a module ip ????

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6899
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ip 4028 no tftp response

Post by cavagnaro » 16 Sep 2016 17:06

Why then you post on OXE? Hummmm???
You need licenses and specific hardware
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Beginner's questions about the OmniPCX OFFICE”