Alcatel Unleashed

have you try to load the latest image ?

Maybe a windows restore to a previus date before the installation of the antivirus ??
To install it from stratch will take you sometime ...

Some times the encoding of the files are not correct .Gain of the wav file-khz-format....
Even if you hear the message in AAS the pbx is not able to play the file.
I would try to make a dynamic voice guide and try to load it in the system to check if the files are OK .

Hello Sir , My first move to all of your questions would be ... any manual available ? do i have time to learn ? The second could be , where is this system came from and who installed it ?? maybe should i call someone for support? This forum is for help yes but this questions are so basic entry that...

on ua cards no. only alcatel digital phones. If you find 4035,4010,4020,4004 in stock house for cheaper solution.

but if sip extension license exists on the system you can use any sip phone. if not then the only solution is analog.

Good luck

i think if you declare 4029 on 8019 device or 8029 device will work on the latest patch.

i have not tried it but it should work.
But the best option is to upgrade .

i suppose your oxe has 10.10.10.1 gateway under netadmin. Also do you have enabled trusted ip addresses on your ip domain? Check also softphone in the network settings if network adapter in your vpn client interface. This config is common and it should work . maybe your nat config is missing some pa...

the replacement is 8019 but also this model i phased out or will be soon.
but before you buy it you need to know if you can connect it to your system. If its is too old you will need an upgrade and maybe use 20h insted of 8019

ports used

client side

tftp 0-65535/udp windows,ios,android 1024-65535 macOS
rtp 32000-32512/udp
signaling 7775/ udp

server side

tftp 69/udp 10000-10499/udp
rtp 32000-32512/udp
signaling 5000-5099 /udp

Manage your firewall and should be ok.

Hello, Did you made a previous configuration to the switch or is out of the box? The serial console is working by default unless you disable it or you are using wrong serial cable. aaa authentication "serial" local must shown in your configuration. to access ssh run the command aaa authent...