Alcatel Unleashed

Good morning everyone,
I am setting up a Syslog server and am currently using the following commands. As I understand it, these commands only allow you to specify a Syslog server IP address.

swlog output socket x.x.x.x remote command-log
swlog remote command-log enable
swlog console level info ...

Good morning, requesting your help
I have an Alcatel Lucent 9907 switch with version, OS9900 8.7.252.R02 GA, March 22, 2021.
I am considering doing the following:
On this computer I have my vlan configured at L3, I have 3 internet links.
What I want to do is have default routes, for example:
My vlan ...

I am getting an error when configuring snmp v3 on an Alcatel-Lucent OS6900-X40 device which has version 7.3.4.212.R02
I have this configuration on the switch

switch-OS6900-X40 -> show configuration snapshot snmp
! Trap Manager:
snmp station 192.168.1.1 161 "test" v3 enable
! SNMP:
snmp security no ...

thank you so much
I ran the certified copy command working, the process completed correctly but when I tried to save normally it sent me the following error

-> copy certified working
Setting RESTORE Timeout for 800 seconds
from /flash/certified to /flash/working
Copying boot.cfg ...

Good day
I am starting with omniswitch, I would appreciate it if you could help me with the following error.
I am having problems saving the configuration changes on the switch with the write memory command, it sends me the following error

-> write memory
ERROR: Write memory is not permitted when ...

Already perform these configurations and try however even so the SNMP is not working.
Also confirm that the snmp port was enabled, some configuration recommendations or Troubleshooting

Good day
I am configuring SNMP, with the following commands, however when I try them, SNMP does not work, will anyone know any configuration that I am missing.

user usersnmpv3 password ******** read-only all sha*des
snmp security no-security
snmp community-map mode enable
snmp community-map ...