Alcatel Unleashed

The below is the way you can access the switch with cable connectivity:

micros USB to RJ-45 <-> Straight UTP -> DB9 connector of ALE <-> USB to Serial console cable.

Use baud rate 115200.

Also download the drivers usb to serial, if you don't have.

https://www.prolific.com.tw/US/ShowProduct.aspx ...

Dear Team,

Does OHL/OLD driver can be integrated with ubuntu hotlync Vm?(Hotel Management). Other than windows opersting servers

Product : Alcatel OXO
Hotel Management : Hotlync installed on linux ubuntu vm

Dear Team
I have 3 switches. I need to implement MAC Group policy on Switch-1.So that only deviceswith specific MAC address are accepted. I had to implement for Voice
& IPTV VLAN.
There are 3 VLAN as below:
VLAN 10 Management
VLAN 20 PABX & Telephones, the Telephone sets are of Alcatel and Ayava ...

Dear Support team.
There are total 16 Access switches (OS6560), 2 distribution switches(OS6900) and 2 core switches(OS9907) in the network. Its a 3-Tier architecture. 2 Access switches are in Virtual Chassis on each floor of the building. Distribution and Core switches are also configured in Virtual ...

Please guide me how to change primary port in the switches.
The switches are configured in virtual chassis.
Port 1/1/54 and Port 2/1/54 are configured as LINKAGG.
So i want to change 1/1/54 as a primary port instead of 2/1/54.

Dear Gleylancer.

I had seen the post where it shows how to do NAT. The link is below:

https://www.alcatelunleashed.com/viewtopic.php?t=23325

I tried and follow the same steps, but the switches are on latest firmware that is why they are not accepting the commands mentioned in the link.

So if ...

Dear Support Team.

I had a OS6560 switch which I want to use as a Core switch. I want to configure NAT so that internal network get access to the external network.
Currently the users are getting IP address from ONT provided by the ISP. I had to create multiple VLANs so that traffic from all the ...