Alcatel Unleashed

Also might want to do a packet capture between the known, working pairs and the huawei one and see whats different.

UPDATE: I got the GPS 10Mhz clocking source working on both the 7705 units and tested the dial-up modem again. Results: I was able to dial-up at 16kbps, but not reliably. It would only dial-up once and failed to connect every time I tried again. I set the USB modem to a max baud rate of 19200. I was...

Okay, so I finally figured it out. The only problem now is that a dial-up modem will not work over the circuit emulation. I can make a phone call through the 7705's, but a regular dial-up modem does not connect. I am going to try hooking up some external GPS clocks to these later and see if that mak...

Okay, so I just disabled/shutdown the keepalives, does it need that for it to work? I also finally got the SDP to say up/up using GRE delivery, however the T1 ports on the Cisco routers connected to these are still in Alarm and won't come up. So, to get this working I need to configure the following...

So one thing I noticed is the SDP Flag KAFailure when I run the show service sdp detail command. Any idea what a KAFailure means? ------------------------------------------------------------------------------- Sdp Id 200 -(192.168.0.2) ----------------------------------------------------------------...

I am trying to deliver a T1 over our current IP/PSN network. This needs to be delivered using CESoPSN with GRE encapsulation as we do not run MPLS on our network. The MTU end to end supports up to 1546 bytes. Topology: T1 from LEC - <7705 1/1/2> - <7705 1/2/7> - <Cisco 3750> - <IP Network> - <Cisco ...