Search found 13 matches
- 30 Mar 2021 16:26
- Forum: OmniSwitch 6465
- Topic: Problem with the PS1 port.
- Replies: 1
- Views: 2667
Re: Problem with the PS1 port.
Hello, When connected to PS1 port, can you run show powersupply. as seeing the device does power on, I suspect the powersupply needs to be enabled. powersupply enable 1 or powersupply enable chassis-id 1 1 It's been a while since I've worked with ALU switches so my apologies should there be an error...
- 30 Nov 2020 18:03
- Forum: OmniSwitch 6465
- Topic: Swich alcatel OS6465-P6 , Advise
- Replies: 4
- Views: 5263
Re: Swich alcatel OS6465-P6 , Advise
Hello, I'm not sure that I understand but. In those temps you need to make sure the following: Use a power supply that can handle the heath. Use the correct SFP's, Industrial temperature range would be best. As well for the SFP's it is best to use 40km's as a 20km sfp is not a standard. I hope this ...
- 08 Nov 2020 10:45
- Forum: OmniSwitch 6465
- Topic: Change power supply
- Replies: 1
- Views: 2718
Re: Change power supply
You need to remove the provisioned power supply first with the no powersupply 1 name Power1 type ALE low-ac (just remove the old one), when you've done this you can provision the new power supply
- 13 Nov 2019 06:58
- Forum: OmniAccess Wireless Access Points
- Topic: OAW-AP1101
- Replies: 1
- Views: 4458
Re: OAW-AP1101
I've added the quickstart guide for these AP's in the attachments.
if i recall correctly, you have to go through the webpage the first time you power these on.
if i recall correctly, you have to go through the webpage the first time you power these on.
- 27 Aug 2019 02:12
- Forum: OmniSwitch 6465
- Topic: 6465 enable POE
- Replies: 4
- Views: 6516
Re: 6465 enable POE
powersupply <number> name <string> type [ale/phoenix-contact/ third-party] wattage <75-185>
powersupply enable <slot>
The wattage part is only for the third party type, otherwise it is 24-48vdc or hi-ac or lo-ac
after this you should be able to enable POE
Kind Regards,
Tommy
powersupply enable <slot>
The wattage part is only for the third party type, otherwise it is 24-48vdc or hi-ac or lo-ac
after this you should be able to enable POE
Kind Regards,
Tommy
- 29 Jul 2019 02:22
- Forum: OmniSwitch 6850 / 6850E
- Topic: Help! Not IT savvy
- Replies: 9
- Views: 5756
Re: Help! Not IT savvy
the most you can do for firewalling on the 6850 are ACL's but that is not a good way to have it connected to the internet. It does not have VPN capabilities. Layer 3 is from the OSI model, and it is going to different broadcast domains eg: from 192.168.2.0/24 to 192.168.3.0/24 The 10gb isn't possibl...
- 27 Jul 2019 15:41
- Forum: OmniSwitch 6850 / 6850E
- Topic: Help! Not IT savvy
- Replies: 9
- Views: 5756
Re: Help! Not IT savvy
the firewall and vpn will be on other systems as the switch is just a "switch". as i'm not sure how far you are in using the switch, segregation with vlans could be interesting (camera's in a separate segment,etc...) otherwise features for home use aren't realy there as it is an enterprise...
- 22 Jul 2019 02:37
- Forum: OmniSwitch 6860 / 6860E
- Topic: Cannot Create VRF
- Replies: 2
- Views: 2307
Re: Cannot Create VRF
you got to give the profile along in the command line.
-> vrf test profile max
or
-> vrf test profile default
-> vrf test profile max
or
-> vrf test profile default
- 24 May 2019 09:20
- Forum: OmniSwitch 6855
- Topic: recommendation on bulk backups for OS6855
- Replies: 1
- Views: 7496
Re: recommendation on bulk backups for OS6855
librenms and oxidized does the job for me, you could also always buy Omnivista 2500.
- 17 Apr 2019 08:15
- Forum: OmniSwitch 6465
- Topic: Visio Stencils
- Replies: 3
- Views: 5550
Re: Visio Stencils
Thank you Silvio, you're the best!