Alcatel Unleashed

Hi ! Small problem running my OmniPCX R2.2 with a "standard" AMIX card to get the line from my PSTN. I don't know why, but it would randomly lose the signal (busy tones on the phones, and external callers only have the classic ringtone, just like if the PBX wasn't connected), and I can't g...

HELLO,
First results of any Google search.

https://www.itc-solution.de/downloads/1 ... ct/338-omc

Please be polite, present yourself and do some search before digging old threads (first post as I can see). Behind the phones, humans are answering.
Thanks.

In OMC, it's "Sauvegarde des données & Basculement" >> "Téléchargement des terminaux" >> "Téléchargement immédiat" (OK). When I was trying to manually upgrade my 8078s, the OXO did it for me. Nice ! If it does not work, try to remove the battery to force-reconnect t...

(Setup : Oxo Connect R2.2/053.001, I don't know if there's a licence to send mails) Hi everybody, I've been trying to get notifications by mail when someone's calling or leaving a message. Everything looks fine in OXO Connect (Global Services, Global Services on the specified phone, SMTP setup...) b...

Hi, On these models, it should be done automatically (it did it on my setup, it does it on Connect R2.0+ or R10.3 and previous versions, as stated in the doc), since your 8158s needs to connect to your OXO, which is the TFTP server (otherwise, you'd get the error "no response from the TFTP serv...

Hello everybody, I've checked everything but I can't solve this, so I hope to get some help ! I need to send DTMF codes to my PSTN operator to manage a blacklist and redirect calls to my cellphone - I also need it this because I can't get the mail notification from my Omnipcx to work. These codes ar...

Hi from late 2022 ! To keep people updated (if someone has the problem too), I had the same problem while setting a used 8078s BT after it upgraded itself from 5.00.32 to 5.40.40 (before, it did work fine). It was just a pure echo from the 8078s mics, with absolutely no sound from the other phone, b...

Latest news : I had the same problem reconnecting my 4068, so I checked all the wiring because I suspected an error on it, but there's nothing here. I checked again webistes with the same problem, and it looks there was something related to Cisco switches. So I checked the VLANs because Cisco switch...

Hi, I'm setting up a refurbished 8078s in NOE mode (I don't even know what it means). The device is created successfully in OMC (valid licence, MAC address...). I've setup the 8078s with a static IP adress, correct submask, TFTP1, etc... But I can't change the CPU1 address (stuck on 172.016.010.10),...

I'm not expert at all, but you have any proxy or firewall running ?
You should sniff the port 5060 (UDP) to check if there's nothing blocking...