Search found 281 matches

by freedom
03 Nov 2014 19:34
Forum: Shelf
Topic: How to move analog extension to another PBX shelf..?
Replies: 2
Views: 2794

Re: How to move analog extension to another PBX shelf..?

If you have access to the OXE via cli or 4760/8770, change the shelf, board and circuit numbers from the extension to 255. Connect the set to the new position and give the extension number and secret code to move the extension to the new hardware address. Or directly configure the new address for th...
by freedom
03 Nov 2014 19:28
Forum: Media Gateway
Topic: Showing Wrong number when do the outside call !!!!
Replies: 12
Views: 5340

Re: Showing Wrong number when do the outside call !!!!

Do you use 8 digitale extensies, like 44451555? Or do you need to stip the first couple of digits? Check your option 'no of digits unused' in the trunk group settings, check your npd and did translator. It should be one of these settings. The call arrives at the pbx, it only fails to reach the corre...
by freedom
12 Mar 2014 18:53
Forum: Passive Communication Server
Topic: Backup IP address change
Replies: 2
Views: 2314

Re: Backup IP address change

Not really sure, but perhaps you have to perform a pcscopy before the changes are taken into account.
by freedom
04 Mar 2014 18:33
Forum: Beginner's questions about the OmniPCX OFFICE
Topic: Speed Dialing by single Number
Replies: 5
Views: 1914

Re: Speed Dialing by single Number

Check your numbering plan to see if the 2 and 3 are already used for something else.
It's not possible to create for instance extension 234 and a speed dial number 2
by freedom
27 Feb 2014 17:12
Forum: 4760
Topic: announce on basic features activation
Replies: 5
Views: 2011

Re: announce on basic features activation

You can create a prefix to disable voice guide listening on a set.
Keep in mind that the user will not hear ANY of the voice guides anymore after dialing this prefix.
by freedom
27 Feb 2014 17:07
Forum: ipTouch (40x8) issues and tricks
Topic: ipTouch phone connect: network home an office
Replies: 3
Views: 1630

Re: ipTouch phone connect: network home an office

How did you setup the VPN tunnel? From PC or directly from your router? The ip phone will never work if you set it up from the PC. If your router opened the VPN tunnel, you have to change the ip config of your phone to match you internal network, 192.168.78.x for the phone with 192.168.178.1 as defa...
by freedom
27 Feb 2014 16:28
Forum: OmniVista 4760
Topic: Some license locks will soon be exceeded
Replies: 3
Views: 1851

Re: Some license locks will soon be exceeded

For the License of the ov4760 to remain valid, the ov4760 has to make contact to the declaration node (OXE) at least once every 31 days.
According to the error message, the ov4760 wasn't able to connect to this OXE for quite some time.

You need to make sure the ov4760 is able to connect to the OXE.
by freedom
18 Feb 2014 13:45
Forum: Attendant
Topic: Show Incomming call ID before pick up the phone set on 4059
Replies: 1
Views: 1391

Re: Show Incomming call ID before pick up the phone set on 4

Showing the number of the caller is a basic function of the OmniDesktop 4059.....
So if you configured it correctly, you should see the callers ID and the internal/entity number that he dialed.
Do you have number display on the IPTouch sets before they answer?
by freedom
18 Feb 2014 13:41
Forum: Beginner's questions about the Crystal Hardware
Topic: Problem in mtcl ->Password and swinst ->Password
Replies: 2
Views: 2929

Re: Problem in mtcl ->Password and swinst ->Password

You could change the passwords if you know the root password, with 'passwd mtcl/swinst'.
Or stop the telephony on B callserver and make a mastercopy.
If that doesn't help, reinstall the software and then perform the mastercopy.
by freedom
14 Feb 2014 16:32
Forum: Encryption
Topic: how to change MSM/SSM password ?
Replies: 1
Views: 2022

Re: how to change MSM/SSM password ?

You can change the SSM/MSM password with the pwd command.

Example:
SSM>pwd
New password : *****
Confirm new password : *****
The password has been changed

Go to advanced search