Alcatel Unleashed

Hi I would like to setup virtual chassis between two 6860E-24U, but they have different firmware version. What is the correct procedure to copy the firmware from the new switch to the old one ? To make work autofabric have I to connect only one QSFP cable, or can I connect two cable from the beginni...

hi
is it possible to do it on AOS 8.x ?
thanks

HI what are the contraindications to use different native vlan ids on the 802.1q trunk ports ? For example I set the vlan untagged on the 10K port, and left the default (1) vlan on all the ports of the remote switch (6250): 10K: show vlan members port 1/1 vlan type status --------+-----------+------...

Hi, you have written "After one week remote switches begin to block themselves." What does it mean? - remote switch is access switch (direct attached to core)? or remote .... - what is block? uplink are blocked? permanent blocked? any loops/redundand ways? - remote switches are also omnis...

Hi Silvio

No Error Frames, just some little lost frames where the interfaces is on a LACP.
Again nothing of strange with show show spantree vlan xx

Topology Changes : 1,
Topology age : 7 days and 05:30:43,

Giacomo

Hi all we just moved from the omniswitch 9800 to the 10k (OS10K 8.3.1.314.R01 GA, September 07, 2016). In the first week from the installation we noticed slowness in the remote networks. After one week remote switches begin to block themselves. every switch is configured with SPT 1x1: show spantree ...