Alcatel Unleashed

Good morning, I am trying to connect to an OXO in release 4.1 from the internet, I have routed port 50443 to local 443 and there is no possibility to connect. Do you know the real port which it is for that release?

Good afternoon, I have a Purpel version oxe with a sip trunk against the operator and another against an Asterix, I need to route all incoming calls to Asterix using the OXE as a gateway, how should I do?

I don't know the numbering in Asterix, only that it is 4 digits.

Greetings.

I have an OXO Connect and an OXO Connect Evolution on the same network. They have done a nat to port 50443 to the OCO to the IP 192.168.1.244, and the external connection with the OMC goes all right, for the OCE they have redirected the external port 50444 to the internal port 50443 with access to t...

Hi, the parameter is to true, the cliente have another fax server.

The problem is to receive, the number is send yo a network number that is routing to the sip gateway.

Regards

Good morning, I am installing an alcatel fax server in version 7.6 with an oxe in version 12.3.1. I can send faxes but when I receive them I have a 480 error. Attached trace. Can anybody help me? Regards. Mon Feb 15 12:46:56 2021 RECEIVE MESSAGE FROM NETWORK (213.0.50.3:5060 [UDP]) (BUFF LEN = 1523)...

Good morning, I have a client with an OXE in release 11, calls come through an automatic attendant giving the option that if you know the number of an extension, you will dial it. The client wants that some extension cannot be called that way and that this call is directed to the physical operator a...

Hi.
I have a problem in oxo, when I deregister a terminal gap and register the new one I get out of a group of extensions, I have to add it again.

Does someone happen to him?

Regards.

Solved, the ops was bad create.

Regards.

Yes, is connected and the jumper of cpu 7-2 in position to connect both cpu's to the customer's electronics.

Regards.

Hi,

1. Is present and working. Only appear one cpu_id.
2. It's OK
3. It's OK

The cpu stand-by never have de role stand-by, always put the role in "Undefined"