Alcatel Unleashed

Dear all,

I try to set a H323 link to an Asterisk server.
I do all at OXE side what described in OXE-OXO H.323 trunking TCO584.pdf.
When I call 7635...
* 76 is the direct speed dial no. prefix
* Call type: IP, IP Add: Asterisk
* Call Number: A1112

In Translator / Prefix plan:
* A11 - Prof trunk ...

Ohh, vad was the faster, but it seems said same

The cold reset clear the config only, the sw and lic is not cleared.
if you use lola, you may need the software and you may need known the lic key.
if you have a saved databade, you can get the keys from it.

Im newbie, but I hope an expert confim it.

Suresh wrote: ↑04 Oct 2009 09:49 another way of cold reset is by physical switch on the cpu (off/on) during boot process

which switch is?
I'm in same problem: used cpu, without saved database, and none of three default passwords working
I have CPUe-2

--

solved: I got the password

Update1:
When the operator set the "Trunk mode" into the SIP line, it begins to work

Hi guys,
I known this is an old thread, I read the DOC, but It's not clear. :(

I have multiple, different SIP numbers. Some number is an international number, but firstly I want to set an inland number.
For example: 0621ABC1652, and I want to place into ext. 200

The SIP trunk successfully, the ...

Shit-shit-shit.
I checked twice... simply changed the cabinet's order in the rack. Both cabinet's 2 position have MIX card... I checked twice...

Thanks! I will continue the things with the correct physical port.

Hm-hm
Someting went wrong.
trkstat 2 10
says, 2-10-0 contains an another trunk, but I don't known why.
If I call this trunk, It works.

So... I don't known what I dit it. And why. So... I'm refresh the doc, I missed it someting.

Okay, But the incoming calls, came from 3-2-0. Physically connected the cisco into 3-2-0.

I don't known what is 2-10-0, because is on an external cabinet, so I set 3-2-0 for physical access.

(1)bankop_b> config all

Thu Oct 18 09:20:27 CEST 2018


Crystal 0 :

+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID ...