Alcatel Unleashed

silvio wrote: ↑23 Apr 2019 13:01 If you use xlation than I prefere to associate every vlan to an own service. So do not use at the SAP :all .
best regards
Silvio

Of course I agree; that's what I'm doing

Hi Silvio :) In my LAB if I enable the "vlan-xlation enable" on the SAP "LOOP-Management" port 1/1/26 it works; but "IMHO" this is only a workaround not the solution. The new feature in 8.5R4 "Configuring an IP Interface on the Control BVLAN": I have tested i...

OmniSwitch AOS Release 8 Network Configuration Guide 8.5R4 Page 209: Configuring an IP Interface on the Control BVLAN To configure an IP interface on the Control BVLAN to support in-band management access in the SPBM domain, use the ip interface command. In the following example, IP interface confi...

Source: Release Notes – Rev. B OmniSwitch 6465, 6560, 6860(E)/6865/6900/9900 Release 8.5R4 SPB Inband Management Over Services In previous releases an IP interface was not permitted on a BVLAN. With this feature enhancement an IPv4 management interface can now be configured on a control BVLAN to pro...

Hi Silvio Thanks for your reply; can you help me in this little LAB ? Two 2-GB Phisical NIC for the management of a Virtual Vlan-IP interface ? It's a BUG ? no Bug. The en-/decapsulation of all the packets for SPB occures in the PHY (means direct in HW) - f.e. with 40Gbs (this is not possible in th...

We can try to loop the EMP-Interface with a phisical-NIC (using only one NIC on the switch) and a Service mapped with sap:0 ...
And the L3 of the management-EMP behind a Router\Firewall with a sap:0 NIC or a sap:XX (802.1Q) with vlan-xlation enabled...

Same "problem"....So for any BCB-Node you MUST have a phisical loop using 2 nic for the management of the Vlan-IP-Interface Two 2-GB Phisical NIC for the management of a Virtual Vlan-IP interface ? It's a BUG ? If my BCB-Node is a stack of two elements I need 4 Phisical interface....

Hi devnull do you agree with me ? Usually a normal log show different information; this device's logs seems to have the debug active. I'm working on thousand of omniswitch 6250-6450-6850-7200 and the logs are totally different. Only in 6865/6900 devices the logs are showing this information. When yo...

the logs from omniswitch 6900 and 6865 are useless.....mine are full of this: 2018 Oct 22 13:15:09 6900 swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: valid 2018 Oct 22 13:20:12 6900 swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: calling system(/bin/va...

Hello everyone, I wish, to say a big thank you for the support. I have many (100+) omniswitch devices between 6865 and 6900; all of them have the logs like this. It's impossible to understand what is appening on the switch a lot of log any time any day any seconds.. Do you have the same problem ? Ab...