Alcatel Unleashed

In a home lab environment i suppose you neeed some extra hw stuff like common hw or WM cabinets, or voice hubs or similar thing you can put interface cards. We used to make connections via LIOB boards, and BRA cards, but there was a limitation in the number of available channels. In a home lab, you ...

Hi, From the oxe do a copy of a database backup to the pcs using the following command rcp /DHS3dyn/BACKUP/IMMED/mao swinst@pcs_ip_addr:/DHS3dyn/BACKUP/IMMED Note: replace pcs_ip_addr with the ip address of the pcs After coping the database, compare the file on the CS and on the PCS, to see if they...

I did it several times, nothing new happened.

I tried pcscopy several times. There was time, when the telephone was started, and there was time when telephone was not started.
The symptom is the same.

Hi! I have a site with PCS which does not work properly. The PCS is a CS2 board. The software version is R100.1 n2.514-30, the same running in the call server. I used netadmin -m to configure the PCS, it seems OK, there are hosts file entries, and i can use ping, telnet, ftp to or from the PCS. I se...

But we do not have real-time accounting enabled.
The PBX just drop some error messages, that appears several hours, 6 times. It is strange.

Hi! Recently we moved to R12, and we have a new 8770 with accounting. Now i get some errors like: "ACCOUNTING: appli ACC_ETH feature incident 2 3" (information 275) I looked after in incinfo, and it tells me this is a buffer overflow error, the capacity of the internal accounting buffer is...

Thank you, Vad!
I suppose the label shows 48V / 0V / PSAL, the polarity of the 48V is unknowwn. I do not remember. I have to check it, if i get back to my site.
I can only remember, if i made a wrong connection, my power sdupply's circuit breaker was shut down the power.

Hi! I received a rather old shelf. It has 10 card spaces. It has a metal box with 3 connectors on the back, 2 of them are +48V and 0V, and the third is labelled "PSAL". I connected the +48V and 0V to a UPS, and the CPU board attached to the cabinet shows signs of life thru a serial console...

Thank you!