Search found 13 matches
- 23 Nov 2016 00:08
- Forum: Encryption
- Topic: Why should I cross cable between Clear port and GD?
- Replies: 6
- Views: 8061
Re: Why should I cross cable between Clear port and GD?
Maybe because the box does not support mdix feature, which is not so unusual (like nonnecting from one pc to another pc)? Why should this be documented? It is general networking knowledge... Thanks for the replay. I was not asking about general networking knowledge... I install with straight cable ...
- 23 Nov 2016 00:01
- Forum: Encryption
- Topic: Why should I cross cable between Clear port and GD?
- Replies: 6
- Views: 8061
- 22 Nov 2016 00:04
- Forum: Encryption
- Topic: Why should I cross cable between Clear port and GD?
- Replies: 6
- Views: 8061
Why should I cross cable between Clear port and GD?
Hello, As the subject, is there any reason why should I use cross cable between SSM/MSM Clear Port and GD/GA/INTIP/CS ? Could anyone explain why?? Because, I (didn't know I must use cross cable) install IP Touch Security solution with straight cable on site, and now find the document that I should u...
- 14 Apr 2014 00:44
- Forum: Boards
- Topic: Ring-down signalig
- Replies: 1
- Views: 2192
Ring-down signalig
Hi everyone,
Is Ring-down signaling possiable in OXE ?
If possiable, which board support it?
Thanks.
Is Ring-down signaling possiable in OXE ?
If possiable, which board support it?
Thanks.
- 14 Jan 2014 00:04
- Forum: Trunk Groups
- Topic: BEARER_CAPABILITY (l=3) 90 90 a3
- Replies: 1
- Views: 2395
Re: BEARER_CAPABILITY (l=3) 90 90 a3
I saw other posts said to add 'Fax' on ARS Route - Qulity. Normally I just add 'Speech'.
After adding 'Fax' it works normally. Could anyone explain why?
I found that 80 is "speech" and 90 is "3k1 audio" but cannot understand clearly.
Thanks.
After adding 'Fax' it works normally. Could anyone explain why?
I found that 80 is "speech" and 90 is "3k1 audio" but cannot understand clearly.
Thanks.
- 07 Jan 2014 08:51
- Forum: Trunk Groups
- Topic: BEARER_CAPABILITY (l=3) 90 90 a3
- Replies: 1
- Views: 2395
BEARER_CAPABILITY (l=3) 90 90 a3
Hello, when call income from public as below (BEARER_CAPABILITY (l=3) 90 90 a3), and if internal user set immedated forward to external number, then call is not forwarded.. is it public problem? or can I config OXE to handle this call? when call incom 'BEARER_CAPABILITY (l=3) 80 90 a3' then user fow...
- 25 Sep 2013 21:13
- Forum: Voice Guides
- Topic: Dynamic voice guide play randomly
- Replies: 2
- Views: 4267
Dynamic voice guide play randomly
Hi all, OXE release is 'R10.0-j1.410-51'. There are lots of dynamic voice guides(DVG) uploaded on site. I don't know how to explain,, but when I play DVG with tone test, sometimes it play other DVG or somtimes play mixed with other DVG. It not happen all the time. To solve issue, I have to reset GPA...
- 08 Nov 2012 22:50
- Forum: OXE (Crystal / Common) - System Documentation
- Topic: Analog Fax issue
- Replies: 1
- Views: 1683
Re: Analog Fax issue
I don't understand but this isssue is solved by changing NPRAE board sync to 255 (which is no synchronize).
After changing that config fax is working just fine.
Any opinion please.
After changing that config fax is working just fine.
Any opinion please.
- 07 Nov 2012 23:32
- Forum: OXE (Crystal / Common) - System Documentation
- Topic: Analog Fax issue
- Replies: 1
- Views: 1683
Analog Fax issue
Hi eveyone, One of my site has fax issue. Site information is R8.0, Appliance server with Crystal gateway. There are fax users connected to eZ32 board. They were working (incomming, outgoing )normally until today. Now fax is not working, even internal fax. When I connect analog phone to fax port, is...
- 07 Nov 2012 23:18
- Forum: ON SITE TROUBLES
- Topic: Cannot hear exact DTMF tone via IP touch.
- Replies: 7
- Views: 4463
Re: Cannot hear exact DTMF tone via IP touch.
FYI, patch is 'J1410.51'