Alcatel Unleashed

Dear friends, hope everybody are fine.

Client with Alcatrel OXE Rel. 10.0 need a new UA set more elegant than 4019/18 so, Can you tell me wich new era of UA Phone will be compatible with Rel.10.0?

Thanks for your attention and replies.

AFLORES.

Hello again.

Finally we got a soluction.

We manage two different NPD Selector, one for each trunk group (originally we were using the same NPD Selector for the two tg and the default NPD)

We cretae two NPD 34 and 35 and on the parameter: example of one of them:

Consult/Modify: Numbering Plan ...

Hello everyone, thanks for your responses:

Before writing the post, we had already discussed the configuration you suggested.

I don't think I explained myself well:

There is only one prefix for making outgoing calls. The first option is the Carrier_1 trunk group, and if it is busy, it overflows ...

Hello all, Hope everybody is fine.

I got a situation on a system A4400 (R3.1) and two different Operators,

Both operator (carriers) are conecte to the 4400 through an E1 MFC-R2 link independent of each other.

Need that, when a user make an outgoing call through Carrier_1, the identification ...

Actually have a trouble configuration between OXO and UCM6510 via ISDN trunk.

The UCM is in the middle of PSTN SIP Trunking Provider and the Alcatel OXO.

Alcatel users must communicate to UCM users and also communicate to external numbers (locals, nationals, international, moviles, etc etc ...

Hello friends, hope all of you are fine.

It is posibble to use the OXO´s CPU3m board in OXE like a CS (any version), GD (any version) or GA (any version)?.

If yes, It is the way as the others OXO´s CPU borads, a ment, just changind the dip switches?

Or can be used as another type of board(s ...

Here the TC

Hello Friends. The case was solved.

It is an old "normal" behavior of dialing in OXO.

You can find the solution at the OXO TC TC1398en-Ed10_Release_Note_Noteworthy_addresses_OXO_Connect (and also in some older TC's).
Look at the Timers labels: IsdnBlkTim. I change the label just as the example on ...

Hello VAD, the GXW4502 it is just a Gateway that interconect the PRI with the SIP provider (like an interpreter). There isn´t to much options to configure.

I will explain btter: let say I´m going to call to the numbre "9876543" and the trunk group prefix is "0" so I press 0 and recibe dial tone to ...

Hello people, I hope everyone is well.

Dear friends, I am currently setting up a PRI connection between an OXO and a Grandstream GXW4502 and a SIP Provider.

Right now incoming calls work fine, but outgoing calls have a little problem.

If I dial the trunk group prefix (0) + the desired number, the ...