Alcatel Unleashed

It is not possible to use the bascul command when the servers are not visible.


(1101)xa011001> twin

Fri Oct 18 13:17:21 CEST 2024


Usage : twin [Redundancy Cpu Enable (y/n)]

Role and CPU positions:

Role of the CPU : MAIN

CPU position : 06

CPU address : 172.22.26.2

Twin CPU position ...

Yes, dear Mr. Alex, the Dual Processors (CS) of my PBX are located in two different networks and have been for several years. They stopped seeing each other a few days ago.
I checked with iperf applications running on computers in the same networks and UDP is not blocked.
Thank you for your ...

(1101)xb011001> netadmin -m

Ethernet interface setup
========================

Netmask : 255.255.255.192

==============================================================================
| Machine type | Local interface | Name | Address ...

Yes, Dear Mr. Frank, I have a license, the system has been in operation since 2010, autostart is turned on, the phone application is up and running on both processors.


Welcome to xa011001
Alcatel-Lucent OmniPCX Enterprise

login: mtcl
Password:
Last login: Mon Sep 23 12:02:29 from 172.22.26.9 ...

Thank you Mr. Frank,
first I checked the network itself, when I telnet on xb (which should be stand-by) the processor can ping xa (Main) and vice versa with xa I can ping Xb. With the command netadmin -m sa the network parameters were checked and all are OK. Everything seems fine, but the processors ...

I have an AL OXE IP MG R.11.0.1 with a duplicated CS configuration in two different subnets and in different locations, a few days ago I noticed that CS, xa and xb are not visible and both north are in "main" status. I restarted xb but it always goes back to "main" status. The phone app works ...

Hello, could someone help me?

Hello everyone,
I have OXE R11.0, can the SIP trunk to the ISP to pick up a protected communication will use TLS protocol without Tales module? Thanks.

Gentlemen,,

Does anyone have a detailed description on the different options/settings for the Classes of Service(Connection COS, Transfer COS…)?
I want to know the meaning of each item (for example, right COS Connection 1-32 ...) .I can't find an adequate description in the system docs. I'd like ...

Dear Sirs Thanks for your help, problem solved, access not authorized by connection COS.