Alcatel Unleashed

Hi everyone, I have integration OXE to Avaya using SIP Trunk. OXE has 2 SIP Trunks, one to local carrier and other to Avaya. The SIP Trunk to local carrier has no problem, already runnnnig for 2 years. The integration to Avaya via SIP Trunk just recently. Calls from OXE to Avaya has no problem. The ...

The exact problem is inbound calls reached to OXE extension (ringing on the phone) but only around 4 seconds and dropped. This is occurs when OXE connected to customer's LAN. If OXE is standalone then the inbound calls has no problem. The oubound calls has nonproblem at all, either connected to LAN ...

Dear All,

I am configuring OA5710 for OXE to Local Carrier SIP Trunk. Can some one share the 5710 configuration? Because i have problem for incoming call to OXE. The call not reached into OXE, outgoing is ok.

Thank you

Regards,
Sinjo

Deart All,

I am configuring OA5710 for OXE to Carrier SIP Trunk (to SBC on the cloud). Can some one share the 5710 configuration? Because i have problem for incoming call to OXE. The call not came into ALU OXE, outgoing is ok.

Regards,
Sinjo

Hello everyone, I have intergations OXE (Rel 9.0) and Avaya via E1 PRA. If Avaya calling to OXE, i got the Avaya trunk name (setting on OXE Trunk Group name) displayed on OXE Digital phone, not extension number of Avaya. But if OXE to Avaya, the OXE's extension number displayed on Avaya digital set....

Hi, I have problem with OXE as below : - i telnet to remote OXE (Common H/W) via WAN. After login i type swinst, choose expert, then to backup mao. But when the backup just running then the telnet console like no activity. So i have to close telnet console. This was happening every time access to OX...

Hi Vad, You correct that the Softclient should send RTP packets to 10.10.10.10, but i used Wireshark the RTP (internal) goes to 182.16.252.155 (direct RTP). But the router configures open port for RTP to goes to external users thru 10.10.10.10. This is the problem that no RTP at both side. Any idea ...

Hi Vad,

My IP configuration as follow :
- OXE 10.10.10.10
- Public IP 182.16.252.155

The IP setting on Softclient (3CX) on Android, Local PBX IP 10.10.10.10, External PABX IP 182.16.252.155.
I don't install GA. Only GD. Is that caused teh problem?

Tks.

The router aleeady support NAT. But evertime call made from internal to mobile user on internet, the RTP always go directly to internet IP. That's doesn't allowed. Supposed the RTP goes to OXE. This is what i am facing.

Hi Cavagnaro,

Router is using for internet connection. Using Mikrotik router. What special router you mean?

Tks.