Alcatel Unleashed

Yepp, went to customer and changed it , now it works., saw a small repaired label on it... went to binn.

Thanks for your response..

// Stefan

Hi ! A customer has a OxE rel 11 with a GD shelf connected via IP with a 244 mix board, on that a IBS is connected into term 32,33 ... two UA Links. suddenly we have an error: vta_type 0 present at position of an IBS what does this mean !!! If we reboot the whole system the IBS comes up, but if the ...

Yes I know, but the call come from an external gateway via an SIP trunk directly connected to an outside carrier.. So in my opinion this trunksetup is of the same type as a ordinary E1/PRA trunk. What confused me if you look att my prev. post that the other 11.2 that system correctly selects trk 4 w...

Hi ! Some more info ... After some reprogramming of our SipProxy we found out that OxE doesn't send a=sendrecv" or "a=sendonly it just sends re-invite and let the rtp just flows on. Eg. it switches the endpoints of the stream to moh , tones... , furthermore Park/hold - retrieve doesn't see...

Again many thanks ... *) Without proper traces its not clear what could be wrong. :: Do you mean a complete motortrace 9 / traced *) Do you have DID translation configured on SIP TG with AA? :: Yes , the other numbers i same range could be called , except the Aut ATT *) Compare INVITES between norma...

Thanks you very much for your concern and rapid answer, The previous problem with barred DDI to SIP trunk call was in the local sip/proxy. only auth inc. call. disabled this and now I can make incoming DDI call thru the SIP trunk .... :-) But he Aut Att. issue I've tried with 11.2 and have the same ...

Hi ! Struggling of moving a customer from ISDN to SIP, everything seems to work except for the Aut Att. The system responds to 404 not found. a small number series is still on the ISDN for testing and this work. Any ideas , I have of course set the Automatic Attendant to YES and the same Calling par...

... some more interesting news on the matter, i've hooked up an snom sipphone to the oxe. did a local call to the sipphone , pressed the call park on the alcatelphone and did see that the phone send a=sendonly to the snom in the trace. Make'd a new call, now via siptrink bounced via extern gw and a ...

Hi !

For your info. Rel 11.2 doesnt change the a=sendrecv" to "a=sendonly either

Is there any one out there that got this call hold working against an operator via extern sip trunk with an OxE release below 12.

/S

Hi
Many thanks haroun for your input..really appreciate this ... Do you know how the 9.1 or 10.1.1 indicate Call Hold instead. Is it in o= field by increasing the session version no by one ... ? ... or ... is there any newer release that correctly handles Call Hold.. (rel 11,12 etc ...)