Alcatel Unleashed

hi, Can any help me. I have the multicast source in the Vlan 36 and I need to pass the multicast session to the Vlan 105 in the OS6850, the routing is static, Idon't have OSPF or RIP, I put the diagram in annex, but I don't now what I need to configure. mrouter?? in wich vlan? 36 or 105? Drawing1.1....

the T3 trace: ______________________________________________________________________________ | (146293:000220:04237) Concatenated-Physical-Event : | long: 84 desti: 0 source: 0 cryst: 1 cpl: 0 us: 0 term: 0 type a5 | tei: 0 >>>> message received : SETUP [05] Call ref : 00 32 | SENDING COMPLETE |____...

I setup um link H323 between "OXE" and Cisco and I have 2 problems,
1. calls coming from the cisco fall down when you answer.
2. outgoing OXE calls drop after 30s

the board is GD3 and the codec is G711 ou G729.

What is de firmware release? Update to 6.3.1.4

You can config de gateway in system, but You one router? or you can enable local Routing.

What is the firmware version???

I have same Voice Visio Stencils

HI,
We can do a stack with the Omniswitch OS6850E and the OS6850? is the same cable? what is the minimal verson support?

this is a CCD, for that, the VG depend if the client have free agent or not, and we have the problem because after 16h the client have allot of calls, when A4400 was connected to the PSTN we didn't have problems because she sent the CONNECT when entering in Voice Guide

YES, I hears the voice guide, but was you now, the PSTN if don't receive a CONNECT after a timout DISCONNECT the call. that is the problem.

we have doing a Workaround, we put Cisco answer the call before go to the CCD.