Alcatel Unleashed

Hi, on my OmniVista 2500 V4.1.2 I am seeing the following error in Notifications : Detected DoS attack. DoS Type:invalidip, umber of attacks: 639733551, IP:1, Mac:28 I am seeing this error on other ports also, eg IP:1 Mac:4 The MAC shown in the notifications window is 00:00:00:00:fe:00 & 00:00:0...

Perfect, that's pretty much what I thought. We have 40GB ports but not enough.... (yet)

Hi,

Does anyone know if it's possible to duplex/aggregate 2 10GB Fibre ports to give 20GB throughput.
I currently use Linkagg & LACP to give failover but would like to offer 20GB capacity to certain servers.

Thanks

Hi,
Thanks for the reply.
I tried that but no luck.
Switch has been RMA'd to Alcatel & advance replacement on its way.

Hi all, Please could someone let me know what the following error is : HALP_config_phy_handle_fw_load: lport 24 FAILED 1 HALP_config_phy_handle_fw_load: lport 25 FAILED 1 These appear on switch bootup, I am trying to add a new switch into an existing stack of 3 - this error appears on sw4. Is it a f...

Hi, I have receioved the following error on one of my OS9700 switches. INTERFACE warning SFP/XFP Rx Power=0.000 mW on slot=5 port=2, crossed DDM threshold for low alarm. This is a link to a remote site (a 10G link) - does this mean the port reset for some reason & what could be the cause ? Thanks

perfect - thanks

Hi,

Please could you tell me how to chase down mac addresses on the 10K
I use this command frequently on the 9800 series but can't find the related command on the 10K
SHOW MAC-ADDRESS-TABLE {mac address}

Thanks

Hi,
we have an old OS6624 and are trying to lock the ports down so can only work with specific mac-addresses - is this possible ?

cheers