Reload Working configuration without reboot

[alocatelli]

Hello everyone,

I have an Omniswitch 9900 switch that is currently running using the Certified configuration.

Code: Select all

9900 > show running-directory

CONFIGURATION STATUS
  Running CMM              : MASTER-PRIMARY,
  CMM Mode                 : VIRTUAL-CHASSIS DUAL CMMs,
  Current CMM Slot         : CHASSIS-1 A,
  Running configuration    : CERTIFIED,
  Certify/Restore Status   : CERTIFIED
SYNCHRONIZATION STATUS
  Flash Between CMMs       : SYNCHRONIZED,
  Running Configuration    : NOT SYNCHRONIZED

Is there a way to switch to Working configuration without rebooting the switch?
Unfortunately, it is a critical switch for the company and it is almost impossible to provide a maintenance window in which to restart it.

Here some info on the switch:

Code: Select all

9900 > show system
System:
  Description:  Alcatel-Lucent Enterprise OS9900 8.5.255.R02 GA, August 29, 2018.,
  Object ID:    1.3.6.1.4.1.6486.801.1.1.2.1.12.1.1,
  Up Time:      220 days 9 hours 47 minutes and 4 seconds,
  Contact:      *******************,
  Name:         *******************,
  Location:     *******************,
  Services:     78,
  Date & Time:  WED APR 24 2024 15:29:03 (CEST)
Flash Space:
    Primary CMM:
      Available (bytes):  1041235968,
      Comments         :  None
    Secondary CMM:
      Available (bytes):  1188036608,
      Comments         :  None

Thanks in advance for your help.
Andrea

[silvio]

copy certified working make-running-directory

[alocatelli]

copy certified working make-running-directory

Thanks Silvio.
Next week I will try your command and let you know if it will working correctly.
I appreciate your support.

[silvio]

maybe the syntax is not fully correct (not checked it). Use the tab-key to find out the correct syntax.