OS6560 web management

[mtcl]

In this OS6560 switch we use SFP-GIG-T in order to connect copper patch cords. We have activated web management, but the application is not working. Ping from the PC doesn't work either.

Please advise

[Gleylancer]

Most likely a missing route or misconfiguration of routes. Bit hard to say considering you posted nothing to work with, no configuration, no topology, no information where the client is located.

[mtcl]

This is the initial configuration, before we send the product to the customer.
This switch will act as core switch where a few OS6360 will be connected

[Gleylancer]

Please post the configuration, IP Addresses you are using and which interfaces you are connected to.

[mtcl]

I try with a few ports and different SFPs in order to avoid hardware failure.
I use 192.168.5.205/24 address and my PC is also in the same network. It seems that the ports of the switch are down

Thank you