In this OS6560 switch we use SFP-GIG-T in order to connect copper patch cords. We have activated web management, but the application is not working. Ping from the PC doesn't work either.
Please advise
OS6560 web management
OS6560 web management
You do not have the required permissions to view the files attached to this post.
- Gleylancer
- Member
- Posts: 157
- Joined: 08 May 2013 03:14
Re: OS6560 web management
Most likely a missing route or misconfiguration of routes. Bit hard to say considering you posted nothing to work with, no configuration, no topology, no information where the client is located.
Re: OS6560 web management
This is the initial configuration, before we send the product to the customer.
This switch will act as core switch where a few OS6360 will be connected
This switch will act as core switch where a few OS6360 will be connected
- Gleylancer
- Member
- Posts: 157
- Joined: 08 May 2013 03:14
Re: OS6560 web management
Please post the configuration, IP Addresses you are using and which interfaces you are connected to.
Re: OS6560 web management
I try with a few ports and different SFPs in order to avoid hardware failure.
I use 192.168.5.205/24 address and my PC is also in the same network. It seems that the ports of the switch are down
Thank you
I use 192.168.5.205/24 address and my PC is also in the same network. It seems that the ports of the switch are down
Thank you