GA VLAN tag

[mbaledent]

Hi there,
is it possible to configure a VLAN tag on a GA board ?
Thanks in advance.
Regards,
M.B.

[mbaledent]

Hi again,
found it in the documentation !
On the Com Server, enter an IP Quality of Service COS number in the Ethernet parameters of the
board, and configure the desired VLAN number and priority level for this COS (see: Configuring
802.1p/Q Parameters in IP QoS COS on page 815).
Chapter 20 802.1p/Q and VLAN
8AL91007USAK - Ed. 01 - April 2020 - IP-PCX Networks 817/899
Notes:
• Changing the number of IP Quality of service COS automatically resets the board.
• The number of IP Quality of Service COS assigned to the IP domain of the board is not taken into account.
The COS used is the one specified in board Ethernet parameters.