8001 phones are not coming UP
8001 phones are not coming UP
Hi! I am facing a big challenge with 8001SIP Handsets. Handsets( more than 40) worked fine for a year or so, then stopped working suddenly. When I connect the handset to network, LEDs turn Red on the front side of the phone( as shown in the attachment) but it doesn't initialize at all.
You do not have the required permissions to view the files attached to this post.
Re: 8001 phones are not coming UP
All? Or just one from 40?
Do you have another working SIP phones?
Do you have another working SIP phones?
Re: 8001 phones are not coming UP
All 40, they worked fine for a year and so. Then failed within 2 months once it started.
Yes there are 30 more phones which are working.
Yes there are 30 more phones which are working.
Re: 8001 phones are not coming UP
Hi,
Can you tell what are the 6 first caracters of the serial number and/or the first 8 caracteres of the mac addr
Can you tell what are the 6 first caracters of the serial number and/or the first 8 caracteres of the mac addr
Re: 8001 phones are not coming UP
Hi,
SN- ESC175
MAC - 00268BB0
SN- ESC175
MAC - 00268BB0
Re: 8001 phones are not coming UP
i had the same issue with one set. it was working fine and after few reboots the phone hanged and all LED was red, never came up, some times it will freeze at initialization. some how, i got it up after using a POE injector and i upgraded the binary. since then no issue.
Re: 8001 phones are not coming UP
I have the same problem, I have around 100 phones and around 25 have been initializing. Is it a phone failure? any solution to the problem? regards
Re: 8001 phones are not coming UP
Any solution for this issue? Please help. Phones going dead.
Re: 8001 phones are not coming UP
I have two types of dead phones:
1- Phone stuck on initializing
2- Phone turns on with lights ON of speaker, voicemail and nothing on display
Thanks!
1- Phone stuck on initializing
2- Phone turns on with lights ON of speaker, voicemail and nothing on display
Thanks!