Alcatel Unleashed

Hello guys

I had a problem with 4400 R3.0 and i could not retrieve the ops from the system. The problem is the floppy did not work (I/O ERROR). I took the backup (mao) i extract it and i was able to take the software.mao file.

Is it possible to built somehow the ops file through the mao file? Or is an other way to retrieve it from the hard disk?

old releases does not have the directory of OPS under usr4..

Not cleare what is your problem:
save mao to cpu disk
download to PC
open mao with 7-Zip
extract from DHS3data/mao what you need (hardware.mao, *.zip, *.swk, *.*.hw, software.mao)

Another way (if you have lab PBX):
- install R3.2 (from R3.2 you have possibility to save OPS to CPU disk)
- restore mao (from R3 PBX)
- save OPS files to CPU disk

thank you vad for your advise..

I made in my lab. after a restoration to an old cpu.