Hi
After installing my team work and setting TCP/IP parameters, installation manual asks to continue installation using the Web interface, where the first procedure is 1. Select OK, but where???? What option of the menu???
See the picture attached.
Thanks.
8460 ACS web interface access
8460 ACS web interface access
You do not have the required permissions to view the files attached to this post.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: 8460 ACS web interface access
https://teamwork.yourdomain.com
The OK i think is still on the CLI
The OK i think is still on the CLI
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: 8460 ACS web interface access
Hi Cav
Thanks for your answer.
I did the settings with a static IP address, and this way I couldn't access web interface. Than, I did the settings dynamic, our server gave IP and host, than I could access. How it is a test, I am using this way. But I think I should access with static IP too.
That OK I asked, CLI (I believe you want to say the "console") gave me after I chose DHCP.
I am testing.
Thanks for your answer.
I did the settings with a static IP address, and this way I couldn't access web interface. Than, I did the settings dynamic, our server gave IP and host, than I could access. How it is a test, I am using this way. But I think I should access with static IP too.
That OK I asked, CLI (I believe you want to say the "console") gave me after I chose DHCP.
I am testing.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3