Setting Up A Polycom Soundstation 2 On An OXO

If you wrote a good one, share it with us !
Post Reply
scottm

Setting Up A Polycom Soundstation 2 On An OXO

Post by scottm »

Has anyone gotten a Polycom Soundstation 2 analogue conference phone to work on the Omni PCX Office? When I try to conference 2 parties it connects the 2 parties and drops from the Polycom leaving the others connected..

Any help would be appreciated.

Thanks,
Scott
Isa

Re: Setting Up A Polycom Soundstation 2 On An OXO

Post by Isa »

Yes, I've got SoundStation Polycom analogue phones.
I can do conferences with 3 without problems, even with external callers or through VOIP.
Just the conferencel must be made from the Polycom phone. It cannot be forwarded by the operator, for example.
Vantheman

Re: Setting Up A Polycom Soundstation 2 On An OXO

Post by Vantheman »

Hi

Try and change the flash time on the polycom the prescribed flash time is 100
we I changed ours to 300 on the polycom now it works fine and I had the exact same problem
scottm

Re: Setting Up A Polycom Soundstation 2 On An OXO

Post by scottm »

I really appreciate this! Can you tell me where this is done.. The OXO is still a little new to me.

Thanks,
junoooni
Member
Posts: 160
Joined: 29 Aug 2016 02:34

Re: Setting Up A Polycom Soundstation 2 On An OXO

Post by junoooni »

Hi I m new to Alcatel OXO.... i have connected it to analog port and i can receive incoming both from internal extensions and external no. but i cannot dial any no. internal or external...please help
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Setting Up A Polycom Soundstation 2 On An OXO

Post by cavagnaro »

Check it's category maybe. Weird. Plug a normal analog extension and test

Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “Documentation”