4059 pc based console
4059 pc based console
dear frnds,
in 4059 operator while using the line , if an incoming call, the existing call getting low volume..?
on speaker mode/handset mode/headser mode.......is there any solution..?
in 4059 operator while using the line , if an incoming call, the existing call getting low volume..?
on speaker mode/handset mode/headser mode.......is there any solution..?
- MTConsulting
- Member
- Posts: 122
- Joined: 01 Feb 2010 04:21
- Location: Sydney - Innerwest
- MTConsulting
- Member
- Posts: 122
- Joined: 01 Feb 2010 04:21
- Location: Sydney - Innerwest
- MTConsulting
- Member
- Posts: 122
- Joined: 01 Feb 2010 04:21
- Location: Sydney - Innerwest
how is buying a PC with a serial port or installing a serial card a pain in the ass vs now needing 4 arms to drive the stupid IP system? I think you haven't seen a MAC/PAC installed properly? I worked with staff who had the old system and now spew about the 'new' and 'better' system. I old keyboards were ideal for business that employed handicapped staff as operators and the new system is no good for them either.
Re: 4059 pc based console
Does the 4059IP with a 4029 (voice path) support volume control for ringing? The volumne increase and decrease on the keyboard makes no difference and the volume on the 4029 cannot be changed when in attendant mode?
SWINSTU
ACSE OXE R12.1
ACSE 8770 R3.2(4760 R5.x)
ACSE OT R2.3 IP/SIP and UC&C
ACSE OXE R12.1
ACSE 8770 R3.2(4760 R5.x)
ACSE OT R2.3 IP/SIP and UC&C
Re: 4059 pc based console
I think it was configurable in the 4059 settings. F11? Can't remember it. Melody and Level can be adjusted there. Userguide?