Hello,
I've a new R9.1 system installation. Ive configured the ssm and msm'boxes. The ssm has signed the lanpbx file and recieved configbt file as well. The msm has recieved the configbt aswell. When I actived the encryption by copying the lanpbx_sec.cfg file to lanpbx and say build configbt I see that the ssm recieves the configbt file. From this moment I reboot the cs. After reboot the Ip shelve is comming up (which is behind the msm) but al the ipphones stay in recieving mode. When I go in the config menu of the phone I see that it is in protected mode. Anyone a clue what this could be? A hint? Otherwize I have to create a ticket at ALU.
Ip Touch 8 series won't start after activating Encryption
Hi MrAnMo,
There is a system in Hungary equipped with SSM and MSM boxes as well.
The hardware is ACT. By description it is possible to connect one MSM Thales box to two INTIP board through a switch.
I didn'n find any relevant information regarding this topic.
For example: do we have to configure the switch ports to work properly for one MSM - two INTIP connection?
If you have any idea or concrete experiment about it, please let me know it.
Regards,
Sándor
There is a system in Hungary equipped with SSM and MSM boxes as well.
The hardware is ACT. By description it is possible to connect one MSM Thales box to two INTIP board through a switch.
I didn'n find any relevant information regarding this topic.
For example: do we have to configure the switch ports to work properly for one MSM - two INTIP connection?
If you have any idea or concrete experiment about it, please let me know it.
Regards,
Sándor
Re: Ip Touch 8 series won't start after activating Encryptio
Hello
I am actualy setting up MSM and SSM for one of our customer in Canada.
My question can look basic but still, I just want to know how to use a PSK file on the SSM boxes.
Thanks
I am actualy setting up MSM and SSM for one of our customer in Canada.
My question can look basic but still, I just want to know how to use a PSK file on the SSM boxes.
Thanks
-
- Alcatel Unleashed Certified Guru
- Posts: 1165
- Joined: 30 Aug 2006 13:43
- Location: Europe, Poland
Re: Ip Touch 8 series won't start after activating Encryptio
After you have some training and spent 3 days and nights on LAB site, well you will do it in 20 minutes including restarts of PABX... So, try to setup a LAB, and 1st have some good training on ALU's university.
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Re: Ip Touch 8 series won't start after activating Encryptio
seriously , is that the answer ?
go get a training ?
nice to know
thks anyway KrzysioD
go get a training ?
nice to know
thks anyway KrzysioD