Hi,
using tsa_maintenance I always see "Config users_lines is not ok".
What does this mean?
I could do a 57 Force loading users and when adding a UC user the correct info in added in OTUC.
I just want to know if this is a problem or not. Call me "overcautious".
Ciao,
Nowi
Config users_lines is not ok! (tsa_maintenance)
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Config users_lines is not ok! (tsa_maintenance)
I always had that when I forgot to apply (confirming) data on Call Server. After doing it (click apply) and a restart "problem" was gone...
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Config users_lines is not ok! (tsa_maintenance)
Hmmm...
did not work for me....
The only Alarm I see is PBX MNGT Service
Problem during start PMS due to problem with DataAccess or Acapi.
have to say that this is a HA installation and the STDBY Server is not yet running. This will be done by Pro Services later on.
Nowi
did not work for me....
The only Alarm I see is PBX MNGT Service
Problem during start PMS due to problem with DataAccess or Acapi.
have to say that this is a HA installation and the STDBY Server is not yet running. This will be done by Pro Services later on.
Nowi
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Config users_lines is not ok! (tsa_maintenance)
I know very old post, but fix to this is reinstall ACAPI.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer