Dear all,
I am newbie of OXE.
Please help me, how to configure OXE to connect fax machine.
And what is license needed for FAX.
Thank u so much.
How to configure fax and what license need
-
- Member
- Posts: 18
- Joined: 04 Jun 2016 23:56
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: How to configure fax and what license need
Fax is an analog set. That is it.
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 18
- Joined: 04 Jun 2016 23:56
Re: How to configure fax and what license need
This so easy. Thank you so much ^^cavagnaro wrote:Fax is an analog set. That is it.
Enviado de meu E6633 usando Tapatalk
Re: How to configure fax and what license need
lol yes it's so easy analog line ? YOU CAN ALSO add analog type =fax (you can found it at the end) , but if you have some E1 LINES witch ²desserve this fax machine try to mnage the isdn teleservice to fax group3 and see what happens lol? i was stucked when i discovered it
-
- Member
- Posts: 8
- Joined: 17 Dec 2018 04:17
Re: How to configure fax and what license need
Hi For All
iam Stuck now in that case but i have an issue
i have pri And a FAX connected to my Sli board and the fax received a Voicecall through the PRI But didn't receive any fax .
i hope some one know what is the problem
thanks a lot dears
iam Stuck now in that case but i have an issue
i have pri And a FAX connected to my Sli board and the fax received a Voicecall through the PRI But didn't receive any fax .
i hope some one know what is the problem
thanks a lot dears
Re: How to configure fax and what license need
try to configure you fax extension as standard set without special services and give it a try