Hi, i need to configure the 802.1x parameters from IP-Touch via telnet. The only config i could find was IP.
I search in the forum and also in the TKB, i try with the help command in the telnet connection but didn't find the way to config.
Thanks
Config iptouch via telnet
Re: Config iptouch via telnet
Hi,
I hope that the attachhed tecnical communication will be of much help you need. On page 98 is described Telnet authorization procedure on OXE.
Best regards
I hope that the attachhed tecnical communication will be of much help you need. On page 98 is described Telnet authorization procedure on OXE.
Best regards
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 4
- Joined: 18 Mar 2013 03:58
Re: Config iptouch via telnet
Hi,
I want to change extension number on iptouch 4018 phone like from 3125 to 1106.
Regards
I want to change extension number on iptouch 4018 phone like from 3125 to 1106.
Regards
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Config iptouch via telnet
Then use mgr can't be done on the set. Read basic documents please
Sent from my XPeria Z
Sent from my XPeria Z
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Config iptouch via telnet
Hi all,
Is in V6. I find the way to set the paramater with the Idenfifier
N_Ident, is my Identifier that I already get the code.
V_Valor, the value that I want.
TopDoc.Parameters & System.Convert.ToStringN_Ident.SetConvertedValueV_Valor,mm
Best Regards,
FlГЎvio Ruivo
Is in V6. I find the way to set the paramater with the Idenfifier
N_Ident, is my Identifier that I already get the code.
V_Valor, the value that I want.
TopDoc.Parameters & System.Convert.ToStringN_Ident.SetConvertedValueV_Valor,mm
Best Regards,
FlГЎvio Ruivo
https://thefreehreportonpsu.com/vigrx-plus-review/