OAW-4504 vlan

Post Reply
User avatar
selectt
Member
Posts: 150
Joined: 04 Jan 2010 05:50

OAW-4504 vlan

Post by selectt » 18 Apr 2018 19:39

hi
I have a current wifi network working on the default VLAN 1 with 20 APs.

this is connected to port 0 directly to an untagged port on ALE switch, all working ok

im trying to add a second SSID on a VLAN 10 to connect to another network on in the clients environment.

Created vlan has to assign to your SSID: Configuration > Wireless > AP Configuration >

AP Group > your group > Virtual AP guest ... I have checked the new VLAN 10 and on my your port / portchannel

does this have to be trunk with "allow all VLANs" or your guest vlan specific (but not as native vlan): this means that the guest

vlan is 802.1q-tagged at the port.

Does the navtive VLAN need entering ?

also can you set a second DHCP for vlan 10 within the controller or will it come from the network side of the VLAN (DHCP SERVER) ?

thank you

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1137
Joined: 01 Jul 2008 10:51
Location: Germany

Re: OAW-4504 vlan

Post by silvio » 20 Apr 2018 06:56

Hi,
You need "trunk" native vlan is your untagged vlan 1. And allowed "all" or 1 and 10
Yes, you can create a lot of dhcp-ranges. the OAW needs than an own ip interface in vlan 10.
regards
Silvio

User avatar
selectt
Member
Posts: 150
Joined: 04 Jan 2010 05:50

Re: OAW-4504 vlan

Post by selectt » 03 May 2018 18:51

yes that worked I also had to tag the port to the other switch, thank you for your help

Post Reply

Return to “OmniAccess WLAN Switching Systems (OEM)”