Design Query - Alcatel Unleashed
Say, how do you create two (600 + 100)?vad wrote: ↑06 Apr 2017 04:20 For one peripheral area you cannot declare more than 800 users.
About PCS - as I understand for configuration like 1800 analog+300 digital - you cannot use PCS. You need external power system (cabinet page - Rectifier/battery=external, Power supply=not supplied).
So, f.e. for building 2 - just create two peripheral areas (600 analog+100 digital). On "cabinet" page - select rectifier=external, power supply=not supplied. You need to order external power system enough for both shelf powering(Technical configuration/power supply section - you have information about consumption).
In another words - instead of on one peripheral area (1200+200) just create two (600+100). You will have just one extra item (second PSAL instead of additional fuse).
I did exactly as you say but I couldn't do it! I need helpvad wrote: ↑05 Apr 2017 23:24 I can suggest two way.
1 - create network - two PBX (one for each building) - but this can be interesting if distant between building big enough (more then 500 m). You will have fault-tolerant solution. Not so good if distant less 500 m and used DECT.
2 - create Central area with just main equipment (external lines, Voice Mail) and create some peripheral shelf - 3 for building one, 2 for building two. In this case you need to pay attention - for power supply, PSAL ordering. In this case in the future will be more easy to change configuration (f.e. add some board exactly to the shelf what you want, without patch before add-on procedure).