Activities on OV 2500 4.2.2.R01

Post Reply
kksan
Member
Posts: 6
Joined: 30 Aug 2018 04:13

Activities on OV 2500 4.2.2.R01

Post by kksan » 31 Aug 2018 10:23

Hi All,
I need to do two activities on an OmniVista.
That's the first time I use it but I didn't find anything that could help me.
I need to:
- change date / time
- set allert email when there are warnings or superior events.
How to?
Thank you for your help and time!

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1177
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Activities on OV 2500 4.2.2.R01

Post by silvio » 31 Aug 2018 11:43

the time/date you have to configure at the console (ssh or vmware) - login as cliadmin. Better is to use the NTP server.
e-mail server in systemsettings (Administrator)
and in trap responder (notifications) you can create filters when a e-mail has to be sent....
use the online help.
regards
Silvio

kksan
Member
Posts: 6
Joined: 30 Aug 2018 04:13

Re: Activities on OV 2500 4.2.2.R01

Post by kksan » 06 Sep 2018 06:15

Hi Silvio,

thank you for your help.
I found how to do what I needed except that I didnt find a way to set the NTP server.

There's an other thing, I'm backupping 27 omniswtiches but 9 of them arent completing the task.
The error is "access denied" with SSH2, but I am sure that credentials are ok, because I usually log into these switches with those informations.
There's something I have to check?
It's strange because only a few of them cant backup.
Thank you
immagine1.PNG
You do not have the required permissions to view the files attached to this post.

cordialguy
Member
Posts: 1
Joined: 06 Sep 2018 16:41

Re: Activities on OV 2500 4.2.2.R01

Post by cordialguy » 06 Sep 2018 17:49

Check how the devices are discovered in Discovery --> Managed Devices. If they are with SSH, then check the switches with eror to allow SSH and change the SSH to telnet by editing the device configuration in Omnivista.

kksan
Member
Posts: 6
Joined: 30 Aug 2018 04:13

Re: Activities on OV 2500 4.2.2.R01

Post by kksan » 07 Sep 2018 12:06

Thank you cordialguy, solved :D

Do you also remember a way to change ntp server?
Didnt find commands to change it by ssh connection :/

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1177
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Activities on OV 2500 4.2.2.R01

Post by silvio » 10 Sep 2018 11:44

the ntp server at the switches you can configure via cli-script. Here the commands for R6-Switches:

Code: Select all

ntp server x.x.x.x
ntp server unsynchronized
ntp client enable
The ntp server at the server itself will be configured at the console of the server (login as cliadmin).

regards
Silvio

Post Reply

Return to “OmniVista 2500 v4.x”