Automatic failover from LAN to SIM??

[masterdaniel007]

Hi All,

I have configured LAN interface as well as the SIM interface on 5720. While using these interfaces individually I can ping internet. I want to achieve H.A.i.e when LAN goes down it should switch to SIM card for connectivity. For that i have given two default routes as follows:-


1) route 0.0.0.0 0.0.0.0 192.168.1.1
2) route 0.0.0.0 0.0.0.0 ppp1 distance 10

but when i remove the lan interface to test this setup, it does not failover to pp1 interface(sim card interface)!!!

Please provide your help for the same.

[escala14]

Config>feature wrr-backup-wan
pair 1 primary interface ethernet0/0 secondary interface cellular1/1
;
stabilization-time 60s
enable
Backup WRR>

This works if physical link connection is unplug or the end device is power-off(not port shutdown)