input for syslog Server

Post Reply
Cyberurmel
Member
Posts: 4
Joined: 02 Jun 2017 03:20

input for syslog Server

Post by Cyberurmel » 12 Jan 2018 09:14

Hi all ,

just to be safe ..
i added for our 6450 Switches the following for sending important Infos to syslog Server :

swlog output socket xxx.xxx.xxx.xxx remote command-log
swlog remote command-log enable
swlog console level info
command-log enable
write memory flash-synchro

is this correct for the most common Information which are needed? And in additional - is the synthax the same for the 6900 Distribution Switches?


Thanks and Regards
Cyb

Post Reply

Return to “OmniSwitch 6450”