NAT to single IP address

Post Reply
Posts: 16
Joined: 01 Oct 2015 23:06

NAT to single IP address

Post by jlambwac » 23 Oct 2018 09:36

Hello Everyone,

Is it possible to NAT from a single internal IP address to a Public IP address on the the 6900? Currently our NATs are setup to specific VLANS. I am not familiar with NATing and I am not sure how to do this or if it is possible. My 6900 is running OS 8.5.164.R01

Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1297
Joined: 01 Jul 2008 10:51
Location: Germany

Re: NAT to single IP address

Post by silvio » 23 Oct 2018 12:47

In my knowledge there is no possibility for NAT at OmniSwitches. Here an info from Alcatel:

"NAT feature is not supported in OmniSwitch, however, we can write QOS in OS6250 and OS6450 only for the IP translation:
Please see the following sample configuration:

policy condition internal source ip mask
policy action external source rewrite ip ip-address
policy rule NAT condition internal action external
qos apply"

best regards

Post Reply

Return to “OmniSwitch 6900”