Hello everyone
In my 8770 administration I would like to delete a trunk (my software is in french so it’s a faisceau)
When I do it I first need to delete the attached « joncteur ».
And the I try to delete the trunk itself and i have an error message
« Enlevez la supervision par routage » (remove the rooting supervision first)
I don’t know where to remove this option, can you help?
In advance thanks ! And if this is not clear do not hesitate to ask me
Romain
How to delete a trunk
Re: How to delete a trunk
What TG type - IP, T2, analogue?
For analogue - may be on some set programmed key "trunk supervision" (change key - unused). Command "multitool" can help find supervision set|key.
For analogue - may be on some set programmed key "trunk supervision" (change key - unused). Command "multitool" can help find supervision set|key.
Re: How to delete a trunk
It’s an analogue TG
In the multitool / supervisor there is nothing
If my understanding is right I need to close the rooting supervision and when I try to put the parameter to NO I have the error message access group active, modification is impossible
In the multitool / supervisor there is nothing
If my understanding is right I need to close the rooting supervision and when I try to put the parameter to NO I have the error message access group active, modification is impossible
Re: How to delete a trunk
If you talk about "supervised by routing" in local TG parameters:
- you need select access - in action select "X25 synchronization disable".
- after some time you can unselect "supervised by routing"...
- you need select access - in action select "X25 synchronization disable".
- after some time you can unselect "supervised by routing"...
Re: How to delete a trunk
Perfect !
Problem solved ! Thank you for all the advice !
Problem solved ! Thank you for all the advice !