Hi Everyone, I try to make it 7750 SR as NTP server, I do command like this
B:SITE-ALU-A>config>system>time# info
----------------------------------------------
ntp
ntp-server
no shutdown
exit
sntp
shutdown
exit
zone UTC
----------------------------------------------
B:SITE-ALU-A>config>system>time#
I do command in site-B
A:SITE-ALU-B>config>system>time# info
----------------------------------------------
ntp
server 192.168.200.1
no shutdown
exit
sntp
shutdown
exit
zone UTC
----------------------------------------------
A:SITE-ALU-B>config>system>time#
Ping to Site-A is reachable, but It doesn't make effect in side B.
A:SITE-ALU-B>config>system>time# /show system ntp
===============================================================================
NTP Status
===============================================================================
Configured : Yes Stratum : -
Admin Status : up Oper Status : up
Server Enabled : No Server Authenticate : No
Clock Source : none
Auth Check : Yes
Current Date & Time: 2015/08/06 17:19:59 UTC
===============================================================================
A:SITE-ALU-B>config>system>time# /show system ntp server
servers server
A:SITE-ALU-B>config>system>time# /show system ntp server 192.168.200.1
===============================================================================
NTP Server
===============================================================================
State Reference ID St Type A Poll Reach Offset(ms)
Remote
-------------------------------------------------------------------------------
reject - srvr - 64 ........ 0.000
192.168.200.1
===============================================================================
A:SITE-ALU-B>config>system>time#
let me know. some missing with my configuration?