Dect 300/400 on DECT 8 board

Post Reply
Dagar
Member
Posts: 11
Joined: 26 Jun 2007 08:30

Dect 300/400 on DECT 8 board

Post by Dagar » 13 Dec 2009 03:03

Hello ,

Can any one help me i,m facing a problem on dect 300/400 sets as its goes out of range of Base station and when comes in range its take too much time to get its signal back.

Its crystal hardware with Appliance server and release is R9.H1301-33d.

Thanks

Jaap
Member
Posts: 4
Joined: 01 Oct 2009 05:21

Re: Dect 300/400 on DECT 8 board

Post by Jaap » 15 Dec 2009 17:09

Can you define what "too much time" is? 30 seconds, 5 minutes, an hour?

There are a few factors which may be involved:
- DECT clock: is it accurate enough?
- Poor coverage?
- Reflective environment?
- Other interfering DECT systems?

Post Reply

Return to “DECT”