Hello all,
I had to test the connection of the OXO Connect with R200/032.001 with a local SIP Provider named "epcan" for a costumer. I was able to establish a connection and all seems to be working, but one thing gives me pause. The provider gave me an address for a STUN-Server, but I have not found the point in OMC where to enter that. Does the OXO Connect not support STUN-Servers or do they just call it differently in OMC.
Any information is appreciated.
Thank you very much.
Daniel
No STUN Server entry in Gateway Parameters?
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: No STUN Server entry in Gateway Parameters?
For stun servers you usually use a SBC not a gateway.
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: No STUN Server entry in Gateway Parameters?
Thank you for your reply. So I take it that the OXO simply does not support the use of a STUN Server. I know that a SBC is the preferred (and recommended) solution, but not every costumer can be convinced to buy one, especially if a rival company tells the costumer that it is not needed (And SBCs are not cheap, especially for SMB costumers). As I said I got the trunk working with the relevant features, I was just missing the field for the STUN Server and was just wondering if I'm to blind to see it.
Best regards
Daniel
Best regards
Daniel