Thanks a lot. I will try, and post the result.
Have a nice weekend!
Z24
Re: Z24
I tried to change the card type. But I was stucked.
mgr
Shelf
Go down hierarchy
Go down hierarchy
SOSM Boards
Consult Modify
I want to change the Boards# 3.
How I input the parameters?
[ All instances ]
[ Set filters ]
[ Select attributes ]
Node Number (reserved) : 1
Shelf Address : 0
Board Address : 3
Instance (reserved) : -------
When I pressed Ctrl+V, the message appear
Error:
Press CANCEL to remove this window
no Such Object Instance
Although I already plugged the Z24 boards.
I don't know each step to change the board type, cause I am a beginner.
Please help.
Thank you.
mgr
Shelf
Go down hierarchy
Go down hierarchy
SOSM Boards
Consult Modify
I want to change the Boards# 3.
How I input the parameters?
[ All instances ]
[ Set filters ]
[ Select attributes ]
Node Number (reserved) : 1
Shelf Address : 0
Board Address : 3
Instance (reserved) : -------
When I pressed Ctrl+V, the message appear
Error:
Press CANCEL to remove this window
no Such Object Instance
Although I already plugged the Z24 boards.
I don't know each step to change the board type, cause I am a beginner.
Please help.
Thank you.
- Eliott_DUP
- Member
- Posts: 793
- Joined: 19 Apr 2007 11:20
- Location: In front of my PC
Re: Z24
I never wrote 2x Go Down and SOSM...
Go to Shelf - Go Down - Board. That's deep enough.
Go to Shelf - Go Down - Board. That's deep enough.
Never give up!
- knightr1der
- Alcatel Unleashed Certified Guru
- Posts: 1788
- Joined: 16 Feb 2007 19:07
- Location: Omnipresent
Re: Z24
ngehek wrote:God bless you.
He is god - well one of a few on this site anyway
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Z24
Wow god blessing for a board...well on OXE you never know...
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer