Hello everyone,
I have a problem with a PCS not able to perform pcscopy on a remote site. I saw a topic talking about the same problem but after some tests, i can say for sure that the problem isn't related to firewall or customer network.
The AS and PCS use R11 (k1.520.22.b), it was working fine before the PCS had a HDD problem and i replaced it. I didn't change configuration (netadmin - Hosts are OK, i can ping both with hostnames etc...). The customer uses Trusted Hosts and SSH security but didn't change config as well.
I thought it was a problem with some ports being blocked by the firewall (already opened 32640 + 22 + 513-1023 found in IP flows document) so I tried to bring PCS on local site, unplugged CPU Standby from network and plugged it directly to the PCS and tried to perform pcscopy, got exactly same error...
PCS is in inactive state, the mechanism is working properly, only thing not working is pcscopy.
I checked everything 3 times and it seems correct, the release is the same on both PCS and AS, OPS are OK, Hosts file is OK.
Second problem is i can't seem to be able to bring inactive state on PCS whitout manually copying the DB from the AS to the PCS, maybe that's the reason why pcscopy is not working since documentation says i shouldn't do that but i already tried it multiple times (when i had ftp problems on VPN for example) and it worked fine.
I have a total of 5 PCS on my OXE, located in different places, and it's the only one not working...
I upgraded the release from R10.1 to R11 two months ago, not sure if it's related or not, it worked fine right after upgrading and until 2 weeks ago when the HDD died.
Did someone experience the same problem or know a solution?
Thanks!