Display calling party number on 4029

Post Reply
User avatar
johank
Member
Posts: 11
Joined: 01 Feb 2010 11:11
Location: South Africa

Display calling party number on 4029

Post by johank » 11 Feb 2010 15:49

Hi,

A 4029 only displays the Name & 1st Name of a calling set.

Has anyone tried to get a 4029 set to display the number / number-and-name of another calling internal set on the screen?

I have looked into this but it seems not possible. I ended up putting the extension number in the Name-field and the client was happy, but it feels like there is another way.

Regards
JK
ACSE, Advanced IP, 4760, Dect, 4635

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3485
Joined: 23 Sep 2004 06:47
Location: Russia

Post by vad » 11 Feb 2010 22:26

4029 display only name, if in phone feature COS for this set you manage "Virtual set on CMP board=1" - this set will display only number.

User avatar
johank
Member
Posts: 11
Joined: 01 Feb 2010 11:11
Location: South Africa

Post by johank » 12 Feb 2010 03:10

Thanks. It just seems that there is enough space to display both name and number. Would have been nice.
ACSE, Advanced IP, 4760, Dect, 4635

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3485
Joined: 23 Sep 2004 06:47
Location: Russia

Post by vad » 12 Feb 2010 03:36

Stupid set - name + number cannot display, only 4 soft keys. User often forget - some feature accessible with navigator (not present on screen).

Post Reply

Return to “Set Profile”