I was wondering if anyone was using the 7450s in a non-SAM environment. We are using OpenNMS, but based on the configuration, we are not receiving traps from any of our 7450s. The config looks like this:
A:Test-ESS>config>log#
event-control "snmp" 2004 generate critical
event-control "snmp" 2005 generate cleared
snmp-trap-group 2
trap-target "OpenNMS" address x.x.x.x snmpv2c notify-community "public"
exit
log-id 2
from main security
to snmp 1024
exit
And our SNMP stuff:
A:Test-ESS>config>system# info
----------------------------------------------
snmp
exit
time
sntp
shutdown
exit
zone UTC
exit
thresholds
rmon
exit
exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
security
telnet-server
snmp
community "public" rwa version both
exit
no per-peer-queuing
exit
#--------------------------------------------------
echo "System Security Cpm Hw Filters Configuration"
#--------------------------------------------------
security
exit
----------------------------------------------
I opened a ticket with Alcatel, but they have not given me a solution.
When I do a "show log log-id 2" I see this output:
A:Test-ESS# show log log-id 2
===============================================================================
Event Log 2
===============================================================================
warning: 18 events dropped from log
Why are the events dropped from the log and not being sent out to the trap server? I read their manual, but it is not very helpful. I also did a search on this board for any info regarding traps in general, but there was not any info for the 7450s. Any help would be appreciated.
Thanks.
Aaron